Skip to main content
Pricing Guides

How much does a handyman cost in Farmers Branch, TX?

By

Owner & Operations Manager

Quick answer

The median Smart Fix handyman job in Farmers Branch cost $925, based on four jobs from February to September 2026.

Prices ran from $464 to $1,643.75, and one of the four jobs cost less than $500. These are full job totals from our records, not hourly rates.

Median job
$925
Jobs under $500
1 of 4
Price range
$464 to $1,644
Jobs analyzed
4
February to September 2026
Call 817-310-8511

Photo reviews are free. We confirm your price before any work starts.

See all four job prices

I’m Chance O’Shel, owner of The Smart Fix Handyman. This guide uses four real jobs our team finished in Farmers Branch between February and September 2026, with the price of each. For the area we cover, see handyman services in Farmers Branch.

Two of the four jobs were hourly furniture assembly for one office move. One rebuilt a damaged door jamb. The biggest job put in kitchen appliances, faucets, a toilet and two vanities in a single visit.

What Farmers Branch handyman jobs cost

The most common price range was $500 to $999 (2 of 4 jobs). Jobs under $500 made up 25% of the total, and one job reached $1,000 or more. The average was $989, a little above the $925 median.

How the four Farmers Branch job prices were spread Each job counts once, even when one visit covered several tasks. The darker bar holds the median job.
Job priceJobsShare of jobs
Under $250 0 jobs 0%
$250 to $499 1 job 25%
$500 to $999 2 jobs 50%
$1,000 and up 1 job 25%
Every Farmers Branch job in this guide All four jobs, lowest to highest price. Dots sit on a shared price scale. The line marks the $925 median.
Work included Job price
Damaged door jamb rebuilt and strike plates reinforced $464
Office furniture assembly, 6.21 hours $869.40
Office furniture assembly, 7 hours $980
Kitchen appliances, faucets, a toilet and two vanities installed $1,643.75

Why is the Farmers Branch median $925?

The Farmers Branch median is $925 because both middle jobs were furniture assembly for one business’s office move. We put together office furniture over two visits at $140 an hour. One visit was 7 hours on site for $980. The other was 6.21 hours for $869.40. The median, $924.70, is the average of those two.

So the median reflects one commercial customer billed by the hour. Travel time wasn’t billed. For furniture assembly, send a list of the pieces and how many of each. The booking for this move had no exact furniture list, so the hours set the price.

What did a door jamb repair cost in Farmers Branch?

A Farmers Branch door jamb repair cost $464. We rebuilt and reinforced the damaged jamb so the door would close. Then we put the strike plates back, secured them and adjusted the latch.

The jamb work was $280, and the strike plates and latch were $105. Materials were $79. They included wood hardener, epoxy filler, a reinforced strike plate kit and 3-inch screws.

For door repair, send photos of the latch side of the frame. Show us any split or soft wood. Tell us if the door still closes.

Does $1,643.75 show what kitchen and bath installs cost in Farmers Branch?

The $1,643.75 Farmers Branch visit can’t price kitchen and bath installs on its own. It covered a dozen tasks, and seven lines on the invoice were discounted. Before discounts, the lines added up to $2,642.50. The discounts took off $998.75.

The customer supplied every fixture. In the kitchen, we set a range, mounted a vent hood, installed a dishwasher and replaced the disposal and faucet. We also replaced a toilet, two bathroom vanities and the shutoff valves, and the visit covered door repairs. Materials were $410.

For sink and vanity installation, send the whole list with a photo of each spot. Tell us which fixtures you’ve already bought. The hood price assumed a recirculating hood with no new ductwork.

What should you send for an accurate Farmers Branch quote?

Send a full task list and say who is buying the parts. These details shaped the Farmers Branch prices most:

  • Who supplies the fixtures. The customer bought every fixture for the $1,643.75 visit.
  • How a range hood vents. That hood price assumed recirculating air and no new ductwork.
  • The state of the door frame. The $464 repair rebuilt a damaged jamb before the strike plates went back.
  • A furniture list. The two office assembly visits were billed by the hour, at 7 hours and 6.21 hours.

How Farmers Branch compares with nearby cities

Across 521 Smart Fix jobs in 35 Dallas-Fort Worth cities, 61% cost less than $500 and the average job came to $959. Farmers Branch's median was $925.

City Jobs Median job Under $500
Farmers Branch (this guide) 4 $925 25%
Carrollton 8 $314 63%
Coppell 4 $527 50%
Irving 17 $392 65%
Lewisville 5 $274 100%
Richardson 4 $535 50%
All 35 Dallas-Fort Worth city guides 521 $250 to $499 61%

Small samples move with one or two large jobs. Compare the work in each guide before you compare medians. See prices for every city we serve

Questions about Farmers Branch handyman prices

The median Smart Fix handyman job in Farmers Branch cost $925, based on four jobs from February to September 2026. Prices ran from $464 to $1,643.75, and one of the four jobs cost less than $500. Your price depends on the tasks, parts and finish work on your list.
Our hourly rate is $145, and our repair minimum is $170. A phone or photo review is free. If the job needs an in-person assessment, a Smart Scan costs $95. We confirm your project price before work starts.
The highest price in this guide, $1,643.75, covered this work: kitchen appliances, faucets, a toilet and two vanities installed. Of the four jobs, two combined more than one type of work in a single visit. A longer list, finish work and materials all add to a total, so compare the work before you compare prices.
Yes, when we supplied them. Each price is the full job total, including the parts and tax we charged, after any discounts or credits. When a customer bought the fixture or TV, the price covers the installation only.
Send us photos and a list of what needs fixing. We review photos for free and confirm the price before work starts. Our technicians are W-2 employees, not subcontractors. Call 817-310-8511 or request pricing online.

About these prices

This guide uses four completed jobs from Smart Fix job and invoice records, pulled on October 20, 2026. Each price is the full job total from its invoices, including parts and tax we charged, after discounts and credits. A visit with several tasks counts as one job. We left out assessment-only visits and any job whose total did not match its invoices.

The median is the middle price once all four are sorted, so one large project cannot pull it up the way it pulls up the average. Dates use the day work started. Cities follow the job address. Customer details stay private. These are past prices for real jobs, not a quote.

Cite this guide: The Smart Fix Handyman, “How much does a handyman cost in Farmers Branch, TX?” (2026), https://www.thesmartfixhandyman.com/pricing-guides/handyman-cost-farmers-branch/

What Farmers Branch customers say

"Attentive to detail, quality of work phenomenal, and very timely. I will definitely use again."

David L.

Google review

"Great experience. Pocket door looks and works great. Matched wall texture pretty well considering how tough that is."

Casey W.

Google review

Get a price for your Farmers Branch project

Send photos of what needs fixing. We review them for free and confirm your price before work starts.

  • W-2 technicians, not subcontractors
  • Written 12-month workmanship warranty
  • Rated 4.8 from 500+ Google reviews
  • $1 million liability coverage
817-310-8511
Start my repair list
THE SMART FIX

A few fixes in mind?

Make a list. We’ll help you get it done.

  1. 1 Your list
  2. 2 Job details
  3. 3 Contact
What needs doing?

Pick all that apply. One job or a whole list.

Choose a job to start your list.