Quick answer
The median Smart Fix handyman job in Cypress cost $175, based on nine jobs from April to August 2026.
Prices ran from $125 to $743.75, and seven of the nine jobs cost less than $500. The middle half of our Cypress handyman jobs cost between $140 and $247. These are full job totals from our records, not hourly rates.
- Median job
- $175
- Jobs under $500
- 7 of 9
- Price range
- $125 to $744
- Jobs analyzed
- 9
- April to August 2026
Photo reviews are free. We confirm your price before any work starts.
See all nine job pricesI’m Chance O’Shel, owner of The Smart Fix Handyman. We offer handyman services in Cypress, and this guide uses the prices of nine real jobs our team finished there between April and August 2026.
Most Cypress jobs were small. Seven of the nine cost less than $250. Two of them fixed a loose toilet paper holder, yet the work and the prices were different.
What Cypress handyman jobs cost
The most common price range was under $250 (7 of 9 jobs). Jobs under $500 made up 78% of the total, and none reached $1,000. The average was $270, well above the $175 median, because a few larger jobs pull it up.
| Job price | Jobs | Share of jobs |
|---|---|---|
| Under $250 | 7 jobs | 78% |
| $250 to $499 | 0 jobs | 0% |
| $500 to $999 | 2 jobs | 22% |
| $1,000 and up | 0 jobs | 0% |
| Work included | Job price |
|---|---|
| Tighten a loose screw on a cabinet-mounted toilet paper holder | $125 |
| General handyman work, tasks not itemized | $140 |
| General handyman work, tasks not itemized | $140 |
| Flooring, tile or grout | $168 |
| Electrical or lighting | $175 |
| Secure a toilet paper holder and repair the wall around it | $189.25 |
| Resize a cabinet opening for a replacement microwave | $246.75 |
| Repair fascia and apply a finish coat of paint | $501.25 |
| Replace two fans, one light fixture and four smoke/CO detectors | $743.75 |
Why did two Cypress toilet paper holder repairs cost different amounts?
The two Cypress holder jobs did different work. The $125 job tightened one screw on a holder. The $189.25 job secured a loose holder with suitable hardware, then patched and touched up the wall.
The $125 holder was mounted to a cabinet, and the fix was tightening an Allen screw. The $189.25 price also included $33 in supplies. These are only two jobs, so the gap is not a set charge for wall damage.
It does show why we ask what moves. Is it the holder, the mounting plate or both? If the wall needs work, ask whether patching and painting are included.
Does buying your own fixtures lower a Cypress install price?
Buying your own fixtures keeps their cost out of the price. The largest Cypress job, $743.75, installed seven units the customer supplied: two ceiling fans, a kitchen light and four smoke/CO detectors.
Each unit went in an existing spot with standard hookups. The detectors were hardwired. The fans were different sizes and the tasks varied, so dividing the total by seven would hide that mix.
The $501.25 fascia job had a supply detail too. It covered repair, prep and a finish coat, but the customer supplied the paint. For exterior repair and painting, check who buys the paint and who applies it.
Does a Cypress cabinet cut-out include paint?
The $246.75 Cypress cabinet job made an opening bigger for a replacement microwave. The microwave’s trim was meant to hide the cut edges, and no paint was included.
The work covered measuring, cutting and cleaning up the opening. It was not a full cabinet rebuild. If the cut edges will show, say so when you ask for a price.
What should you send for an accurate Cypress quote?
Photos and a short note on what is loose get you the closest price. These details moved the Cypress prices most:
- What is loose. One holder job only needed a screw, while the other needed wall repair too.
- Parts you already own. The fans, light, detectors and fascia paint were all supplied by customers.
- Who paints. The fascia job used the customer’s paint, and the cabinet job had no paint at all.
- Whether cut edges will show. The microwave job counted on its trim to hide them.
How Cypress compares with nearby cities
Across 74 Smart Fix jobs in 8 Greater Houston cities, 72% cost less than $500 and the average job came to $448. Cypress's median was $175.
| City | Jobs | Median job | Under $500 |
|---|---|---|---|
| Cypress (this guide) | 9 | $175 | 78% |
| Conroe | 10 | $284 | 70% |
| Houston | 13 | $486 | 54% |
| Humble | 8 | $219 | 88% |
| Magnolia | 9 | $378 | 56% |
| Montgomery | 4 | $441 | 50% |
| All 8 Greater Houston city guides | 74 | $250 to $499 | 72% |
Small samples move with one or two large jobs. Compare the work in each guide before you compare medians. See prices for every city we serve
Questions about Cypress handyman prices
About these prices
This guide uses nine completed jobs from Smart Fix job and invoice records, pulled on October 20, 2026. Each price is the full job total from its invoices, including parts and tax we charged, after discounts and credits. A visit with several tasks counts as one job. We left out assessment-only visits and any job whose total did not match its invoices.
The median is the middle price once all nine are sorted, so one large project cannot pull it up the way it pulls up the average. Dates use the day work started. Cities follow the job address. Customer details stay private. These are past prices for real jobs, not a quote.
Cite this guide: The Smart Fix Handyman, “How much does a handyman cost in Cypress, TX?” (2026), https://www.thesmartfixhandyman.com/pricing-guides/handyman-cost-cypress/
What Cypress customers say
"Cody was great. Helpful, polite and professional."
"The quality of work exceeded my expectations."
Get a price for your Cypress project
Send photos of what needs fixing. We review them for free and confirm your price before work starts.
- W-2 technicians, not subcontractors
- Written 12-month workmanship warranty
- Rated 4.8 from 500+ Google reviews
- $1 million liability coverage