Appliance Water-line Hookups in DFW

We connect dishwashers and refrigerators to water lines. Our local handymen make sure fittings are tight and water flows with no leaks.

Same-Week Appointments Available

Water Lines Must Be Installed Right

Improper hookups can cause slow leaks, pressure problems, or damaged flooring. If a water line isn’t connected or sealed the right way, it may fail without warning. You might notice:

Water-line Hookup Work

Our local handymen connect the water line from your dishwasher or fridge to the valve. We seal the joints, test the flow, and check for drips.

Dishwasher Hookup

We connect the water line and drain hose to your dishwasher.

Ideal For:

New installs or after a kitchen change.

Refrigerator Hookup

We run a line from your shutoff valve to the fridge inlet.

Ideal For:

New fridges or non-working dispensers.

Shutoff Valve Check

We inspect the valve before and after hookup.

Ideal For:

Loose fittings or hard water damage.

Our 4-Step Appliance Hookup Process

Inspection & Estimate

We check the shutoff valve, measure the line distance, and inspect the appliance port. Then we give a clear quote based on the setup.

Prep and Clear Area

We move the unit forward and look behind it for access. We protect the floor and prep the fittings and hoses for install.

Connect and Seal

We connect the water line to the valve and to the appliance. Then we tighten the fittings and seal each joint to prevent leaks.

Test and Clean Up

We turn the water back on, run a full test, and check for leaks. Then we push the appliance back and wipe down the area.

View Our Appliance Hookup Work

See how we connect water lines safely for DFW homeowners with simple installs that work right the first time.

Frequently Asked Questions

Do I need to provide the water line or fittings?

You can, or we can bring the correct parts. We match them to your appliance and shutoff valve.

How long does hookup take?

Most jobs take 1 to 2 hours. It depends on access, space, and line length.

What if I don’t have a shutoff valve nearby?

We’ll look at your setup and tell you what’s possible. If needed, we can plan a valve install as a separate job.

Can you fix an old or leaking connection?

Yes. We can replace old fittings and lines during the job. We’ll test the flow and make sure it’s sealed.

Do you hook up both water and drain for dishwashers?

Yes. We connect the water supply and the drain hose, and test both before we finish.

We Arrive on Time, Every Time

You’ve worked with contractors who are late, leave a mess, or vanish mid-job. We’re not like that. At The Smart Fix Handyman, we arrive on time. We follow through and respect your home. You shouldn’t have to chase down help. When you hire us, the job gets done right, the first time.

Appliance Water-line Hookups in DFW

Water Lines Must Be Installed Right